- #Bescor mp 101 extension drivers
- #Bescor mp 101 extension registration
- #Bescor mp 101 extension code
#define motorB 13 // Pin 13 controls the direction of Motor B using the values 0 and 1 #include "ArduinoNunchuk.h" // The library used by the Nunchuck
* Nunchuck Library created by Gabriel Bianconi, * This program controls the Bescor MP-101 Pan/Tilt system using the Wii Nunchuck If you have any questions, please contact me or leave a comment.
#Bescor mp 101 extension code
Here’s a link to the library we’ll be using to get the Nunchuck working.Įach line of code below will be labeled and hopefully help you understand the process. (Update: Here’s a link to installing the Arduino Software.) If anyone’s interested in a in depth tutorial about using the Arduino software, please leave a comment.
#Bescor mp 101 extension drivers
In this step, the Arduino software and drivers need to be installed on the computer. Yellow/ Blue – Tilt, Purple/ Red – Pan Step 5: Program the Arduino The wires are connected as followed on the motor shield:īrown – 3.3v Step 4: Connect the MIDI Wires to the Arduino Motor Shield Step 3: Connect the Nunchuck Wires to the Arduino Motor Shield If you use a different extension, the wire colors might be in a different order. These wires will connect to the Arduino pins and later I’ll show in the code the pin assignments. To connect the Wii Nunchuck controller, I used this extension. Step 2: Strip the Nunchuck Extension Wires (Note: The wire colors from other cables might be different from the original cable.) It’s also possible to use the original cable. I’ll be using a five pin MIDI cable like this one. I searched for a better remote, but couldn’t find one at a reasonable price, so after trying a few experiments, I found using the Nunchuck, the Arduino, and the motor shield together, I could make a great controller. Also, the speed slider is difficult to use while panning. First off, the controller only allows movement on one axis at a time. The Bescor MP-101 pan and tilt is a great cost effective solution for video and photo setups, but it has several limitations. I’ll try to get a working prototype up this week. It can be used worldwide with an appropriate adapter, sold separately.Update: Thanks to Bill Porter, there is a better way to connect the Bescor to the Arduino instead of using the Motor Shield.
The Bescor PS-260 AC Power Supply for MP-101 Motorized Pan Head features a 120-240VAC, 60/50Hz input and 6VDC, 700mA output. PS-260 AC Power Supply for MP-101 Motorized Pan Head. The Bescor RE-50 extension affords 50' (15.24 m) of additional separation from the MP-101 remote pan head to its remote control. RE-50 50' Extension Cord for MP-101 Pan Head Remote Control. This head can be powered by four AA batteries, the Bescor PS-260 AC power supply, or a Bescor 90-645 external battery, all sold separately.Įnables panning and tilting of a camera remotely at adjustable speedsġ/4"-20 threads for tripod, 1/4"-20 screw mount for camera
The maximum horizontal angle is +/-170 degrees, and the maximum vertical angle is +/-15 degrees. All tripods and cameras are compatible.Īn Auto Pan Mode allows for continuous panning motion, and a switch selector lets you assign end points at 45 Degree, 90 Degree, or 340 Degree.
#Bescor mp 101 extension registration
The two mounting points are the 1/4"-20 tripod threads underneath and the 1/4"-20 camera mounting screw with registration pin on top. Two independent motors smoothly operate horizontal and vertical motion at adjustable speeds. The Bescor MP-101 Motorized Pan & Tilt Head attaches between a tripod and camera and enables remote panning and tilting of the camera. The included AC power supply allows you to power the head when mains power is available, or you can power it with separately available Bescor 90-645 or AA batteries. The remote control allows you to control the head from 50' away thanks to the included remote extension cable. The MP-101 mounts between your tripod and camera, supports up to 6 lb payloads, and can pan and tilt at adjustable speeds. This kit includes the MP-101 Motorized Pan & Tilt Head, a PS-260 AC power supply, a remote control, and a 50' remote extension cable. Control your camera's pan and tilt remotely with this Motorized Pan & Tilt Head Kit from Bescor.
0 kommentar(er)
